"""
.. redirect-from:: /tutorial/intermediate/tight_layout_guide

.. _tight_layout_guide:

==================
Tight layout guide
==================

How to use tight-layout to fit plots within your figure cleanly.

*tight_layout* automatically adjusts subplot params so that the
subplot(s) fits in to the figure area. This is an experimental
feature and may not work for some cases. It only checks the extents
of ticklabels, axis labels, and titles.

An alternative to *tight_layout* is :ref:`constrained_layout
<constrainedlayout_guide>`.


Simple example
==============

With the default Axes positioning, the axes title, axis labels, or tick labels
can sometimes go outside the figure area, and thus get clipped.
"""

# sphinx_gallery_thumbnail_number = 7

import matplotlib.pyplot as plt
import numpy as np

plt.rcParams['savefig.facecolor'] = "0.8"


def example_plot(ax, fontsize=12):
    ax.plot([1, 2])

    ax.locator_params(nbins=3)
    ax.set_xlabel('x-label', fontsize=fontsize)
    ax.set_ylabel('y-label', fontsize=fontsize)
    ax.set_title('Title', fontsize=fontsize)

plt.close('all')
fig, ax = plt.subplots()
example_plot(ax, fontsize=24)

# %%
# To prevent this, the location of axes needs to be adjusted. For
# subplots, this can be done manually by adjusting the subplot parameters
# using `.Figure.subplots_adjust`. `.Figure.tight_layout` does this
# automatically.

fig, ax = plt.subplots()
example_plot(ax, fontsize=24)
plt.tight_layout()

# %%
# Note that :func:`matplotlib.pyplot.tight_layout` will only adjust the
# subplot params when it is called.  In order to perform this adjustment each
# time the figure is redrawn, you can call ``fig.set_tight_layout(True)``, or,
# equivalently, set :rc:`figure.autolayout` to ``True``.
#
# When you have multiple subplots, often you see labels of different
# axes overlapping each other.

plt.close('all')

fig, ((ax1, ax2), (ax3, ax4)) = plt.subplots(nrows=2, ncols=2)
example_plot(ax1)
example_plot(ax2)
example_plot(ax3)
example_plot(ax4)

# %%
# :func:`~matplotlib.pyplot.tight_layout` will also adjust spacing between
# subplots to minimize the overlaps.

fig, ((ax1, ax2), (ax3, ax4)) = plt.subplots(nrows=2, ncols=2)
example_plot(ax1)
example_plot(ax2)
example_plot(ax3)
example_plot(ax4)
plt.tight_layout()

# %%
# :func:`~matplotlib.pyplot.tight_layout` can take keyword arguments of
# *pad*, *w_pad* and *h_pad*. These control the extra padding around the
# figure border and between subplots. The pads are specified in fraction
# of fontsize.

fig, ((ax1, ax2), (ax3, ax4)) = plt.subplots(nrows=2, ncols=2)
example_plot(ax1)
example_plot(ax2)
example_plot(ax3)
example_plot(ax4)
plt.tight_layout(pad=0.4, w_pad=0.5, h_pad=1.0)

# %%
# :func:`~matplotlib.pyplot.tight_layout` will work even if the sizes of
# subplots are different as far as their grid specification is
# compatible. In the example below, *ax1* and *ax2* are subplots of a 2x2
# grid, while *ax3* is of a 1x2 grid.

plt.close('all')
fig = plt.figure()

ax1 = plt.subplot(221)
ax2 = plt.subplot(223)
ax3 = plt.subplot(122)

example_plot(ax1)
example_plot(ax2)
example_plot(ax3)

plt.tight_layout()

# %%
# It works with subplots created with
# :func:`~matplotlib.pyplot.subplot2grid`. In general, subplots created
# from the gridspec (:ref:`arranging_axes`) will work.

plt.close('all')
fig = plt.figure()

ax1 = plt.subplot2grid((3, 3), (0, 0))
ax2 = plt.subplot2grid((3, 3), (0, 1), colspan=2)
ax3 = plt.subplot2grid((3, 3), (1, 0), colspan=2, rowspan=2)
ax4 = plt.subplot2grid((3, 3), (1, 2), rowspan=2)

example_plot(ax1)
example_plot(ax2)
example_plot(ax3)
example_plot(ax4)

plt.tight_layout()

# %%
# Although not thoroughly tested, it seems to work for subplots with
# aspect != "auto" (e.g., axes with images).

arr = np.arange(100).reshape((10, 10))

plt.close('all')
fig = plt.figure(figsize=(5, 4))

ax = plt.subplot()
im = ax.imshow(arr, interpolation="none")

plt.tight_layout()

# %%
# Caveats
# =======
#
# * `~matplotlib.pyplot.tight_layout` considers all artists on the axes by
#   default.  To remove an artist from the layout calculation you can call
#   `.Artist.set_in_layout`.
#
# * ``tight_layout`` assumes that the extra space needed for artists is
#   independent of the original location of axes. This is often true, but there
#   are rare cases where it is not.
#
# * ``pad=0`` can clip some texts by a few pixels. This may be a bug or
#   a limitation of the current algorithm, and it is not clear why it
#   happens. Meanwhile, use of pad larger than 0.3 is recommended.
#
# Use with GridSpec
# =================
#
# GridSpec has its own `.GridSpec.tight_layout` method (the pyplot api
# `.pyplot.tight_layout` also works).

import matplotlib.gridspec as gridspec

plt.close('all')
fig = plt.figure()

gs1 = gridspec.GridSpec(2, 1)
ax1 = fig.add_subplot(gs1[0])
ax2 = fig.add_subplot(gs1[1])

example_plot(ax1)
example_plot(ax2)

gs1.tight_layout(fig)

# %%
# You may provide an optional *rect* parameter, which specifies the bounding
# box that the subplots will be fit inside. The coordinates are in
# normalized figure coordinates and default to (0, 0, 1, 1) (the whole figure).

fig = plt.figure()

gs1 = gridspec.GridSpec(2, 1)
ax1 = fig.add_subplot(gs1[0])
ax2 = fig.add_subplot(gs1[1])

example_plot(ax1)
example_plot(ax2)

gs1.tight_layout(fig, rect=[0, 0, 0.5, 1.0])

# %%
# However, we do not recommend that this be used to manually construct more
# complicated layouts, like having one GridSpec in the left and one in the
# right side of the figure. For these use cases, one should instead take
# advantage of :doc:`/gallery/subplots_axes_and_figures/gridspec_nested`, or
# the :doc:`/gallery/subplots_axes_and_figures/subfigures`.


# %%
# Legends and annotations
# =======================
#
# Pre Matplotlib 2.2, legends and annotations were excluded from the bounding
# box calculations that decide the layout.  Subsequently, these artists were
# added to the calculation, but sometimes it is undesirable to include them.
# For instance in this case it might be good to have the axes shrink a bit
# to make room for the legend:

fig, ax = plt.subplots(figsize=(4, 3))
lines = ax.plot(range(10), label='A simple plot')
ax.legend(bbox_to_anchor=(0.7, 0.5), loc='center left',)
fig.tight_layout()
plt.show()

# %%
# However, sometimes this is not desired (quite often when using
# ``fig.savefig('outname.png', bbox_inches='tight')``).  In order to
# remove the legend from the bounding box calculation, we simply set its
# bounding ``leg.set_in_layout(False)`` and the legend will be ignored.

fig, ax = plt.subplots(figsize=(4, 3))
lines = ax.plot(range(10), label='B simple plot')
leg = ax.legend(bbox_to_anchor=(0.7, 0.5), loc='center left',)
leg.set_in_layout(False)
fig.tight_layout()
plt.show()

# %%
# Use with AxesGrid1
# ==================
#
# Limited support for :mod:`mpl_toolkits.axes_grid1` is provided.

from mpl_toolkits.axes_grid1 import Grid

plt.close('all')
fig = plt.figure()
grid = Grid(fig, rect=111, nrows_ncols=(2, 2),
            axes_pad=0.25, label_mode='L',
            )

for ax in grid:
    example_plot(ax)
ax.title.set_visible(False)

plt.tight_layout()

# %%
# Colorbar
# ========
#
# If you create a colorbar with `.Figure.colorbar`, the created colorbar is
# drawn in a Subplot as long as the parent axes is also a Subplot, so
# `.Figure.tight_layout` will work.

plt.close('all')
arr = np.arange(100).reshape((10, 10))
fig = plt.figure(figsize=(4, 4))
im = plt.imshow(arr, interpolation="none")

plt.colorbar(im)

plt.tight_layout()

# %%
# Another option is to use the AxesGrid1 toolkit to
# explicitly create an Axes for the colorbar.

from mpl_toolkits.axes_grid1 import make_axes_locatable

plt.close('all')
arr = np.arange(100).reshape((10, 10))
fig = plt.figure(figsize=(4, 4))
im = plt.imshow(arr, interpolation="none")

divider = make_axes_locatable(plt.gca())
cax = divider.append_axes("right", "5%", pad="3%")
plt.colorbar(im, cax=cax)

plt.tight_layout()
