# The comms/zigpy/py-zigpy-znp,python3 port

## py3-zigpy-znp-0.13.1 – zigpy module and tools for TI CC2652/similar

## Description

    zigpy-znp is a Python library that adds support to zigpy for radio
    modules using Texas Instruments Zigbee Network Processor (ZNP) devices
    running compatible Z-Stack firmware. It also provides tools that can be
    run from the command line. See TOOLS.md for basic information; small
    adaptations are needed for OpenBSD, e.g.

    $ python3 -m zigpy_znp.tools.network_backup /dev/cuaU0 -o network_backup.json
    $ python3 -m zigpy_znp.tools.energy_scan -a /dev/cuaU0
    $ python3 -m zigpy_znp.tools.network_scan -a -c 11 /dev/cuaU0

    Several ranges of controller are supported, including the recommended
    CC2652- and CC1352-based ones. These are often supplied with firmware
    that requires replacing before they can be used. See documentation,
    but common hardware includes:

    - Electrolama zzh CC2652R and Slaesh CC2652R sticks (running Z-Stack 3
    firmware) - can be flashed using cc2538-bsl.

    - TI LAUNCHXL-CC26X2R1 (running Z-Stack 3 firmware).

    - CC2531 (running Z-Stack Home 1.2). You can flash CC2531ZNP-Prod.bin
    to your stick directly with zigpy_znp's flash_write tool if your stick
    already has a serial bootloader.

WWW: https://github.com/zigpy/zigpy-znp

Categories:
  comms lang/python

## Library dependencies

## Build dependencies

- devel/py-build,python3
- devel/py-installer,python3
- devel/py-setuptools,python3
- devel/py-setuptools-git-versioning,python3
- devel/py-wheel,python3
- lang/python/3

## Run dependencies

- comms/zigpy/py-zigpy,python3
- devel/py-async-timeout,python3
- devel/py-jsonschema,python3
- devel/py-voluptuous,python3
- lang/python/3
- textproc/py-coloredlogs,python3