Adding a node or other deployment type

HP SUM uses the same function to add all node and deployment types.

You can add a node using a specific IP address or by searching an IP address range. Prerequisites for adding a node:

Know the IP address of the node you are adding.
Know the type of node you are adding. This helps HP SUM complete the inventory faster.
If you are planning to assign a baseline to a node, add the baseline first. For more information, see Adding a baseline.

From the Nodes screen, click +Add Node. The name of this button changes if you are adding a different deployment type, for example, OA.

If you want to add a single node by IP or DNS name, go to the next step, and then skip step 3. If you want to search a range of IP addresses for node, skip to step 3.

If you want to add a single node by IP or DNS name:

Select Add a single node or known range of nodes.
Enter the IP address, DNS name, or range of IP addresses. For example, entering 10.0.1.1–10.0.1.20 adds 20 nodes.

NOTE: If you are adding a VC node, use the IP address of a primary Enet module.
Enter a description for the node.
In the Type of node to add field, select the node type. If you do not know the node type, select Unknown. During the inventory process, HP SUM determines the node type. If you are adding a node from a Deployment Type screen, HP SUM automatically selects the node type.

NOTE: Selecting the correct node type might help HP SUM complete node inventory faster.

Some nodes require information that is specific to the node. For more information about the requires for each node, see Node-specific additional details.

For more information on a Moonshot node, see Moonshot node overview.
Select the baseline, additional package, or both to apply to this node. This is optional.
Select a group from the list, if you want to assign the node to a group. This is optional.
Select one of the following:
- Use current credentials (requires existing trust relationship with the node): This option is for Windows nodes only.
- Enter administrator credentials: Enter the username and password for a user with administrator privileges on the node..

Linux and HP-UX nodes allow you to use sudo credentials to deploy updates without logging into the node with root credentials. To use sudo commands, you have to install sudo capabilities on the node.


	NOTE: Super user and sudo are not available for all nodes.

If you want to use sudo, in the Access Level field, select one of the following:

Click Use sudo to update components if you want to use sudo credentials.
Click Enter super user credentials to update components if you want to enter super user credentials.


	NOTE: If you are using super user credentials, enter normal user credentials in the Credentials field, and then add super user credentials in the Access Level field. HP SUM first logs in using the normal user credentials, and then uses the super user credentials to log into the super user account.

Click Add.

If you want to add a node by searching a range of IP addresses:
1. Select Find nodes on network with an IP range.
2. Click Find Nodes.
3. Enter a range of IP addresses for HP SUM to search, and click Search.
  
  NOTE: HP SUM only searches one subnet/octet, the final four digits of an IPv4 address. HP SUM does not search IPv6 networks.
  
  HP SUM displays the nodes it finds in the Available Nodes field.
4. Select the nodes you want to add from the Available Nodes section, and then click Add Nodes.
5. If you want to assign a baseline, select a Baseline, Additional Packages in the Baseline to Apply field.
6. In the Credentials section, select whether to Use current user credentials (Windows only) or Enter administrator credentials.
  
  If you choose to enter administrator credentials, enter a username and password.
Click Add.

In the Added Nodes section, HP SUM displays the nodes you selected.
Click Cancel to go back to the Nodes screen.

Node-specific additional details

Some nodes have node-specific information that you need to include when you add a node.

Node type

Additional details

Windows

Enter what you want to do if HP SUM detects an update process on the node:
- Leave the update running and bypass the node
- Stop any currently running update process on the node and replace it with updates from this session

Linux

Enter what you want to do if HP SUM detects an update process on the node:
- Leave the update running and bypass the node
- Stop any currently running update process on the node and replace it with updates from this session
Select the access level for this node:
- None
- Use sudo with credentials entered above
- Enter super user credentials to update components

HP-UX

Enter what you want to do if HP SUM detects an update process on the node:
- Leave the update running and bypass the node
- Stop any currently running update process on the node and replace it with updates from this session
Select the access level for this node:
- None
- Use sudo with credentials entered above
- Enter super user credentials to update components

VMware Host

No node-specific settings.

NOTE: HP SUM does not automatically migrate VMware nodes if DRS or HA is enabled. For more information on migrating VMware nodes, see the documentation for HP OneView for VMware vCenter at:

http://www.hp.com/go/ovvcenter/docs

Onboard Administrator

Select whether you want to automatically add associated nodes. This adds all nodes in the chassis.

If you are updating OAs and iLOs at the same time, select this for OA nodes so HP SUM detects associated iLO nodes. HP SUM can determine the proper deployment order when you deploy updates to the OA.

If you do not provide credentials, HP SUM uses the credentials you provide for the OA for associated VCs.

Superdome 2 Onboard Administrator

No node-specific settings.

HP SAS B/L Interconnect Switch

Select whether you want to automatically add associated nodes. This adds all nodes in the chassis.

Add the Associated Onboard Administrator’s credentials

Associated Onboard Administrator IP/DNS
Use credentials above: Uses the same credentials you entered previously.
Enter administrator credentials: Enter the credentials if they differ from the credentials you entered earlier.

Fibre Channel Switch

Select whether you want to automatically add associated nodes. This adds the onboard administrator.

iLO

Select whether you want to automatically add associated nodes. This adds the onboard administrator.


	IMPORTANT: Do not add an iLO as a node if you are going to use it as part of an iLO Federation group.

If you are updating OAs and iLOs at the same time, select this for OA nodes so HP SUM detects associated iLO nodes. HP SUM can determine the proper deployment order when you deploy updates to the OA.

Moonshot

iLO CM Administrator Credentials: Username and Password.
Switch Credentials: Username, Password, Enable Password.
Select Credentials are the same on both switches if Switch B uses the same credentials. If not, deselect this and enter the Switch B credentials.

Virtual Connect

Some VC options, such as VC Activation order, can be set from the Edit Node or Review/Deploy Node screen.

Select whether you want to automatically add associated nodes. This adds all nodes in the chassis.

Add the Associated Onboard Administrator’s credentials

Associated Onboard Administrator IP/DNS
Use credentials above: Uses the same credentials you entered previously.
Enter administrator credentials: Enter the credentials if they differ from the credentials you entered earlier.


	NOTE: If you are adding a VC node, use the IP address of a primary Enet module.


	NOTE: Selecting the correct node type might help HP SUM complete node inventory faster.


	NOTE: HP SUM only searches one subnet/octet, the final four digits of an IPv4 address. HP SUM does not search IPv6 networks.

prev	up	next
Using the Nodes screen	home	Editing a node